12Jul Air-con unfinish/redo/new DIY(prefer east area)
+34
pessimizt
boardrider02
josephlhc94
mkkiaforte
eric lee
ace_mav
muff
lawrenceke
rajsankar
kapitan
kysoong
IronQuest
Jason
mwerkz
Juz@kid
nsr182
andikong
dandeana21
tower7
greatgazoo
chiewjy
nocash
myforte
joepele
yummyking77
Fortec
Terrier
waypoint
ctoh
koayst
keigo
tish
Daniel^Bigcow
SpicyRed
38 posters
Page 1 of 4 • 1, 2, 3, 4
12Jul Air-con unfinish/redo/new DIY(prefer east area)
hey guys, starting this new thread for those bros who miss out/unfinish air-con DIY.
materials with me:
1m rubber insulator(abt 5pcs)
one + 1/2 can of adhesive glue
if any bros from 5th MU still holding to the rubber adhesive tape & cable ties, pls bring along.
if not, we nd to purchase more.
pls bring own pliers for taking out one of the nuts, scissors, cutter
knives and one tiny plastic bottle to contain the adhesive glue.
master andi bro, wld be nice if u cld join us too...ur wisdom is always needed
from another thread, bro waypoint suggest a MSCP with a kopitiam downstairs at Serangoon North Ave 4.
i'm ok with that unless there's a better location shelter from the rain.
1)SpicyRed
2)
materials with me:
1m rubber insulator(abt 5pcs)
one + 1/2 can of adhesive glue
if any bros from 5th MU still holding to the rubber adhesive tape & cable ties, pls bring along.
if not, we nd to purchase more.
pls bring own pliers for taking out one of the nuts, scissors, cutter
knives and one tiny plastic bottle to contain the adhesive glue.
master andi bro, wld be nice if u cld join us too...ur wisdom is always needed
from another thread, bro waypoint suggest a MSCP with a kopitiam downstairs at Serangoon North Ave 4.
i'm ok with that unless there's a better location shelter from the rain.
1)SpicyRed
2)
SpicyRed- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
SpicyRed wrote:hey guys, starting this new thread for those bros who miss out/unfinish air-con DIY.
materials with me:
1m rubber insulator(abt 5pcs)
one + 1/2 can of adhesive glue
if any bros from 5th MU still holding to the rubber adhesive tape & cable ties, pls bring along.
if not, we nd to purchase more.
pls bring own pliers for taking out one of the nuts, scissors, cutter
knives and one tiny plastic bottle to contain the adhesive glue.
master andi bro, wld be nice if u cld join us too...ur wisdom is always needed
from another thread, bro waypoint suggest a MSCP with a kopitiam downstairs at Serangoon North Ave 4.
i'm ok with that unless there's a better location shelter from the rain.
1)SpicyRed
2)
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
Daniel^Bigcow- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
hey guys, starting this new thread for those bros who miss out/unfinish air-con DIY.
materials with me:
1m rubber insulator(abt 5pcs)
one + 1/2 can of adhesive glue
if any bros from 5th MU still holding to the rubber adhesive tape & cable ties, pls bring along.
if not, we nd to purchase more.
pls bring own pliers for taking out one of the nuts, scissors, cutter
knives and one tiny plastic bottle to contain the adhesive glue.
master andi bro, wld be nice if u cld join us too...ur wisdom is always needed
from another thread, bro waypoint suggest a MSCP with a kopitiam downstairs at Serangoon North Ave 4.
i'm ok with that unless there's a better location shelter from the rain.
1)SpicyRed
2)Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
materials with me:
1m rubber insulator(abt 5pcs)
one + 1/2 can of adhesive glue
if any bros from 5th MU still holding to the rubber adhesive tape & cable ties, pls bring along.
if not, we nd to purchase more.
pls bring own pliers for taking out one of the nuts, scissors, cutter
knives and one tiny plastic bottle to contain the adhesive glue.
master andi bro, wld be nice if u cld join us too...ur wisdom is always needed
from another thread, bro waypoint suggest a MSCP with a kopitiam downstairs at Serangoon North Ave 4.
i'm ok with that unless there's a better location shelter from the rain.
1)SpicyRed
2)Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
SpicyRed- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
There is another MSCP with kopitiam at sengkang, its block 266 punggol road.
Please count me in if the date permits me to. in because 2 liter one need to measure own length as the length uncle andi had was for 1.6 liters one.
think keigo also need to cut himself.
1)SpicyRed
2)Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
Please count me in if the date permits me to. in because 2 liter one need to measure own length as the length uncle andi had was for 1.6 liters one.
think keigo also need to cut himself.
1)SpicyRed
2)Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
tish- Moderator
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
If you all don't mind maybe will want to come to my side MSCP Blk 318 Anchorvale Rd (just opps Nan Chiau Primary Sch) which is quite big and the top level is always empty...
Please count me in if the date permits me to. in because 2 liter one need to measure own length as the length uncle andi had was for 1.6 liters one.
think keigo also need to cut himself.
1)SpicyRed
2)Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
Please count me in if the date permits me to. in because 2 liter one need to measure own length as the length uncle andi had was for 1.6 liters one.
think keigo also need to cut himself.
1)SpicyRed
2)Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
When and what time is the next MU ?
And where ?
Is it confirmed ?
And where ?
Is it confirmed ?
koayst- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
err lastly what time?? Can do it at morning 9.30AM???? If not do it at Sat nite 9.30pm??
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
So is it set this weekend?
Sat or Sun?
Time?
Location? Preferably east
I had done mine today and have spare black plastic cables, some "sticky" rubber and 1 ft of insulator left. Can bring them down for your use.
I can confirm the aircon IS noticeably cooler
Sat or Sun?
Time?
Location? Preferably east
I had done mine today and have spare black plastic cables, some "sticky" rubber and 1 ft of insulator left. Can bring them down for your use.
I can confirm the aircon IS noticeably cooler
ctoh- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
keigo wrote:err lastly what time?? Can do it at morning 9.30AM???? If not do it at Sat nite 9.30pm??
Keigo, you cannot even see the engine clearly at night in a MSCP, how to do the DIY? Unless you have a volunteer holding a torchlight for you. Even then - SIONG ah
ctoh- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
ctoh wrote:keigo wrote:err lastly what time?? Can do it at morning 9.30AM???? If not do it at Sat nite 9.30pm??
Keigo, you cannot even see the engine clearly at night in a MSCP, how to do the DIY? Unless you have a volunteer holding a torchlight for you. Even then - SIONG ah
O cause I though the MSCP got light ma... cause even I do my LED also dont at MSCP without problem lei..
Then I though at nite more cooling ma..
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
ctoh wrote:keigo wrote:err lastly what time?? Can do it at morning 9.30AM???? If not do it at Sat nite 9.30pm??
Keigo, you cannot even see the engine clearly at night in a MSCP, how to do the DIY? Unless you have a volunteer holding a torchlight for you. Even then - SIONG ah
Actually I got those bight touch light where always use it to sweep tomb one... heehe
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
If time permitting, I will also turn-up to see-see-look-look... No intention to insulate my pipes. =)
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
waypoint- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
SpicyRed wrote:hey guys, starting this new thread for those bros who miss out/unfinish air-con DIY.
materials with me:
1m rubber insulator(abt 5pcs)
one + 1/2 can of adhesive glue
if any bros from 5th MU still holding to the rubber adhesive tape & cable ties, pls bring along.
if not, we nd to purchase more.
pls bring own pliers for taking out one of the nuts, scissors, cutter
knives and one tiny plastic bottle to contain the adhesive glue.
master andi bro, wld be nice if u cld join us too...ur wisdom is always needed
from another thread, bro waypoint suggest a MSCP with a kopitiam downstairs at Serangoon North Ave 4.
i'm ok with that unless there's a better location shelter from the rain.
1)SpicyRed
2)
wow doing it at the MSCP opposite mine and hew office =X
hmm.. you guyz might want to take note.. it is good to do at that carpark.. but try doing it from deck G onwards.. cause this carpark very popular and neighbourhood nearby will complaint if their carpark are park with non-season car.
Terrier- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
6) Fortec (Kay-poh also)
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
6) Fortec (Kay-poh also)
Fortec- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
keigo wrote:ctoh wrote:keigo wrote:err lastly what time?? Can do it at morning 9.30AM???? If not do it at Sat nite 9.30pm??
Keigo, you cannot even see the engine clearly at night in a MSCP, how to do the DIY? Unless you have a volunteer holding a torchlight for you. Even then - SIONG ah
O cause I though the MSCP got light ma... cause even I do my LED also dont at MSCP without problem lei..
Then I though at nite more cooling ma..
Ok just confirm my MSCP very bright... I check on the FL lighting it is almost every slot got 1 FL light.
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
7) Yummyking77 (1.6 SX White )Fortec wrote:1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
6) Fortec (Kay-poh also)
yummyking77- Newbie
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
May I suggest that for those meeting up that day to not turn on their air-con so that we can all start off with a dry pipe instead? Unless there is a need to confirm which pipe it is! =)
BR,
w a y
BR,
w a y
waypoint- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Hi all,
Juz posted this in another thread.
--------
I thought I saw some tape type of insulation material...
Not sure if that would be easier to apply / install?
Something like this?
Armaflex
Juz posted this in another thread.
--------
I thought I saw some tape type of insulation material...
Not sure if that would be easier to apply / install?
Something like this?
Armaflex
joepele- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
keigo wrote:keigo wrote:ctoh wrote:keigo wrote:err lastly what time?? Can do it at morning 9.30AM???? If not do it at Sat nite 9.30pm??
Keigo, you cannot even see the engine clearly at night in a MSCP, how to do the DIY? Unless you have a volunteer holding a torchlight for you. Even then - SIONG ah
O cause I though the MSCP got light ma... cause even I do my LED also dont at MSCP without problem lei..
Then I though at nite more cooling ma..
Ok just confirm my MSCP very bright... I check on the FL lighting it is almost every slot got 1 FL light.
bro, i also prefer doing it during nite time(aft DIY, all of us can go for a drink....it wld be fun)
but then again, lighting when DIY is vy important, we know, cos last sun, sky cloudy but manageable.
since the MSCP is @ ur place, can u try open ur bonnet & look @ the air-con piping, just to confirm the FL light is not being block?
if pospose, take a few pic w/o flash wld be great.
SpicyRed- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
6) Fortec (Kay-poh also)
7) Yummyking77 (1.6 SX White )
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
6) Fortec (Kay-poh also)
7) Yummyking77 (1.6 SX White )
SpicyRed- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
SpicyRed wrote:
DIY
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White )
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
Bro,
Date:12july
Time?
Venue?
tish- Moderator
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Ok tonite I go take using my iPhone and show you.
If lighting ok can every make it at sat nite 11 jul instead. At least Sunday can rest else Monday work very sian.
Lastly is all the matterial enough? Cause not enough can someone free go purchase? If not is the shop at ubi open on sat afternoon I go rush over to purchase.
If lighting ok can every make it at sat nite 11 jul instead. At least Sunday can rest else Monday work very sian.
Lastly is all the matterial enough? Cause not enough can someone free go purchase? If not is the shop at ubi open on sat afternoon I go rush over to purchase.
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
tish wrote:SpicyRed wrote:
DIY
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White )
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
Bro,
Date:12july
Time?
Venue?
bro, let wait for keigo bro's pic from his MSCP, if the lighting from the FL gd enough, if everyone ok, we might use that place.
SpicyRed- Junior Member
waypoint- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
keigo wrote:Ok tonite I go take using my iPhone and show you.
If lighting ok can every make it at sat nite 11 jul instead. At least Sunday can rest else Monday work very sian.
Lastly is all the matterial enough? Cause not enough can someone free go purchase? If not is the shop at ubi open on sat afternoon I go rush over to purchase.
bro, counting on u to take gd pics from ur MSCP so as to convince the rest of them to do it over ur place
as for the materials, from the no. of bros reg right now, everything shld be enough, unless more bros joining us.
ok, can all bros who going to contribute the materials, pls stated what u going bring on that day so that we'll know whether it enough for all of us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one + 1/2 can of adhesive glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White )
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
SpicyRed- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Suggestion/alternative location for DIY.
Blk 318 Anchorvale Rd (just opps Nan Chiau Primary Sch)-Keigo(11jul night)
Blk 638 or 642 MSCP along Punggol Drive(Kopitiam, supermarket, toilet, brightly lit areas under shelter, open-air top level)-waypoint
ok, can all bros who going to contribute the materials, pls stated what u going bring on that day so that we'll know whether it enough for all of us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White )
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
Blk 318 Anchorvale Rd (just opps Nan Chiau Primary Sch)-Keigo(11jul night)
Blk 638 or 642 MSCP along Punggol Drive(Kopitiam, supermarket, toilet, brightly lit areas under shelter, open-air top level)-waypoint
ok, can all bros who going to contribute the materials, pls stated what u going bring on that day so that we'll know whether it enough for all of us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White )
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
SpicyRed- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
6) Fortec (Kay-poh also)[/quote]
7) Yummyking77 (1.6 SX White )
8) myforte (the unfinish...)
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) waypoint (just kay-poh)
6) Fortec (Kay-poh also)[/quote]
7) Yummyking77 (1.6 SX White )
8) myforte (the unfinish...)
myforte- Newbie
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Suggestion/alternative location for DIY.
Blk 318 Anchorvale Rd (just opps Nan Chiau Primary Sch)-Keigo(11jul night)
Blk 638 or 642 MSCP along Punggol Drive(Kopitiam, supermarket, toilet, brightly lit areas under shelter, open-air top level)-waypoint
ok,
can all bros who going to contribute the materials, pls stated what u
going bring on that day so that we'll know whether it enough for all of
us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
Blk 318 Anchorvale Rd (just opps Nan Chiau Primary Sch)-Keigo(11jul night)
Blk 638 or 642 MSCP along Punggol Drive(Kopitiam, supermarket, toilet, brightly lit areas under shelter, open-air top level)-waypoint
ok,
can all bros who going to contribute the materials, pls stated what u
going bring on that day so that we'll know whether it enough for all of
us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
SpicyRed- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
ok.. here is the photo just taken without edit..... which I jsut go check it out and the place is windy cause front and back nothing is blocking the carpark..
Pic of the pipe..
Pic of my carpark level 4 only.. totally empty.. If not happy go level 5 also empty.. lolz..
Pic of how I park my car to have very bright light for those who prefer bright light. But actually even you park normally also bright enough.
since carpark empty.. anyhow park also can...
Pic of the pipe..
Pic of my carpark level 4 only.. totally empty.. If not happy go level 5 also empty.. lolz..
Pic of how I park my car to have very bright light for those who prefer bright light. But actually even you park normally also bright enough.
since carpark empty.. anyhow park also can...
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
keigo wrote:ok.. here is the photo just taken without edit..... which I jsut go check it out and the place is windy cause front and back nothing is blocking the carpark..
since carpark empty.. anyhow park also can...
Bro the place?
nocash- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
If the lighting is good enough, then we can confirmed that the DIY session is at this place. Keigo pls provide the address and map. Should start fr 8pm to 8.30pm as I took 1.5 hr to complete it in broad day light. Perhaps we can go for drinks (alcoholic or non) after everyone completes the job
ctoh- Junior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Anyone from the westside going for this?? Hehehe!! If can, can go together?? :-)
I a bit lost when it comes to that area..... hehehehe!! :-)
But I really wanna go!! If not to do, also to watch and maybe learn how to do. Hehehehe!! :-)
I a bit lost when it comes to that area..... hehehehe!! :-)
But I really wanna go!! If not to do, also to watch and maybe learn how to do. Hehehehe!! :-)
Daniel^Bigcow- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
If everyone ok let fix it...
Blk 318 MSCP Anchorvale Rd level 5 (just opps Nan Chiau Primary Sch, near to compas point)-Keigo(11 jul 8.30PM)
Another side of the map in case for those who know the popular kite flying area..
ok,
can all bros who going to contribute the materials, pls stated what u
going bring on that day so that we'll know whether it enough for all of
us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
Blk 318 MSCP Anchorvale Rd level 5 (just opps Nan Chiau Primary Sch, near to compas point)-Keigo(11 jul 8.30PM)
Another side of the map in case for those who know the popular kite flying area..
ok,
can all bros who going to contribute the materials, pls stated what u
going bring on that day so that we'll know whether it enough for all of
us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
Last edited by keigo on 7th July 2009, 11:02 pm; edited 2 times in total
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
anyone got the insulator tape????
O ya is 1m long enough for 2L car???
Lastly we got 5 never done and 1 (myforte, unfinish) and missing insulator tape.. look like the materials is not enough..
Bro SpicyRed possible to help some more insulator and the tape?? How much later we all chip in to pay you back... Thank you.
O ya is 1m long enough for 2L car???
Lastly we got 5 never done and 1 (myforte, unfinish) and missing insulator tape.. look like the materials is not enough..
Bro SpicyRed possible to help some more insulator and the tape?? How much later we all chip in to pay you back... Thank you.
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
keigo wrote:anyone got the insulator tape????
O ya is 1m long enough for 2L car???
Lastly we got 5 never done and 1 (myforte, unfinish) and missing insulator tape.. look like the materials is not enough..
Bro SpicyRed possible to help some more insulator and the tape?? How much later we all chip in to pay you back... Thank you.
Yeah yeah!! I dun mind paying!! Hehehe!! Best if someone do my car for me, I pay can?? Or dinner and drinks on me?? :-)
Daniel^Bigcow- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
7) chiewjy (1.6.. hmm can wash car there also..)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
7) chiewjy (1.6.. hmm can wash car there also..)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh also)
chiewjy- Newbie
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Chiewjy... best this place even suit you.. the MSCP level 1 got 2 washing point where you just need 20 cents and there is about 30L of water produce for you to wash you car...
Last edited by keigo on 7th July 2009, 11:05 pm; edited 1 time in total
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Daniel^Bigcow wrote:keigo wrote:anyone got the insulator tape????
O ya is 1m long enough for 2L car???
Lastly we got 5 never done and 1 (myforte, unfinish) and missing insulator tape.. look like the materials is not enough..
Bro SpicyRed possible to help some more insulator and the tape?? How much later we all chip in to pay you back... Thank you.
Yeah yeah!! I dun mind paying!! Hehehe!! Best if someone do my car for me, I pay can?? Or dinner and drinks on me?? :-)
can pay me $100 I don't mind do it for you...
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Includes materials and all?? Hehehe!! :-)
But like you not the 'master' when it comes to this wor?? Why cost so much for your service?? Hehehehe!! :-)
I bring you go drink and on me k?? :-)
If we doing it on saturday evening, then can go club after we are done. :-)
Someone mention got washing bay rite?? We go shower there lor!! Hehehehe!! :-)
But like you not the 'master' when it comes to this wor?? Why cost so much for your service?? Hehehehe!! :-)
I bring you go drink and on me k?? :-)
If we doing it on saturday evening, then can go club after we are done. :-)
Someone mention got washing bay rite?? We go shower there lor!! Hehehehe!! :-)
Daniel^Bigcow- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh & wash car also)
3) greatgazoo (Kay-poh and wash car also so)
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh & wash car also)
3) greatgazoo (Kay-poh and wash car also so)
greatgazoo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Daniel^Bigcow wrote:Includes materials and all?? Hehehe!! :-)
But like you not the 'master' when it comes to this wor?? Why cost so much for your service?? Hehehehe!! :-)
I bring you go drink and on me k?? :-)
If we doing it on saturday evening, then can go club after we are done. :-)
Someone mention got washing bay rite?? We go shower there lor!! Hehehehe!! :-)
After done yours and when I do mine I will be Master already lor..
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
keigo wrote:Daniel^Bigcow wrote:Includes materials and all?? Hehehe!! :-)
But like you not the 'master' when it comes to this wor?? Why cost so much for your service?? Hehehehe!! :-)
I bring you go drink and on me k?? :-)
If we doing it on saturday evening, then can go club after we are done. :-)
Someone mention got washing bay rite?? We go shower there lor!! Hehehehe!! :-)
After done yours and when I do mine I will be Master already lor..
@#@$#$%$^%^& use me as guinea pig ahh??!! Terrible!! :-( And to think I was contemplating paying you!! :-(
Forget it!! :-(
Daniel^Bigcow- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Hi SpicyRed,
i will bring pliers and pen knife cutter and plactic bottle container for glue. Cheers!
i will bring pliers and pen knife cutter and plactic bottle container for glue. Cheers!
yummyking77- Newbie
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
If everyone ok let fix it...
Blk 318 MSCP Anchorvale Rd level 5 (just opps Nan Chiau Primary Sch, near to compas point)-Keigo(11 jul 8.30PM)
Another side of the map in case for those who know the popular kite flying area..
ok,
can all bros who going to contribute the materials, pls stated what u
going bring on that day so that we'll know whether it enough for all of
us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
Yummyking77
i will bring pliers and pen knife cutter and plactic bottle container for glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh & wash car also)
3) greatgazoo (Kay-poh and wash car also so)
Blk 318 MSCP Anchorvale Rd level 5 (just opps Nan Chiau Primary Sch, near to compas point)-Keigo(11 jul 8.30PM)
Another side of the map in case for those who know the popular kite flying area..
ok,
can all bros who going to contribute the materials, pls stated what u
going bring on that day so that we'll know whether it enough for all of
us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
Yummyking77
i will bring pliers and pen knife cutter and plactic bottle container for glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh & wash car also)
3) greatgazoo (Kay-poh and wash car also so)
keigo- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
[quote="keigo"]If everyone ok let fix it...
Blk 318 MSCP Anchorvale Rd level 5 (just opps Nan Chiau Primary Sch, near to compas point)-Keigo(11 jul 8.30PM)
Another side of the map in case for those who know the popular kite flying area..
ok,
can all bros who going to contribute the materials, pls stated what u
going bring on that day so that we'll know whether it enough for all of
us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
Yummyking77
i will bring pliers and pen knife cutter and plactic bottle container for glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh & wash car also)
3) greatgazoo (Kay-poh and wash car also so)
4) Tower7 [kay-poh & supply 2 pkt black cable tie & 1/2 roll of adhesive tape]
Blk 318 MSCP Anchorvale Rd level 5 (just opps Nan Chiau Primary Sch, near to compas point)-Keigo(11 jul 8.30PM)
Another side of the map in case for those who know the popular kite flying area..
ok,
can all bros who going to contribute the materials, pls stated what u
going bring on that day so that we'll know whether it enough for all of
us, not enough, i can go & buy @ sat noon.
SpicyRed materials
1m rubber insulator(abt 5pcs)
one 1/2 can of adhesive glue
Yummyking77
i will bring pliers and pen knife cutter and plactic bottle container for glue
1) SpicyRed
2) Daniel^Bigcow ( This weekend can. Next weekend I cant. Hehehe!! :-) )
3) Tish (2 liter)
4) Keigo (2 liter also)
5) Yummyking77 (1.6 SX White)
6) myforte (the unfinish...)
Lookouts for summon aunty
1) waypoint (just kay-poh)
2) Fortec (Kay-poh & wash car also)
3) greatgazoo (Kay-poh and wash car also so)
4) Tower7 [kay-poh & supply 2 pkt black cable tie & 1/2 roll of adhesive tape]
tower7- Newbie
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
All east siders?? No one from the west going?? :-(
Daniel^Bigcow- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
ooo!!! wat time r u guyz going to meet ah????
dandeana21- Senior Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
SpicyRed wrote:hey guys, starting this new thread for those bros who miss out/unfinish air-con DIY.
materials with me:
1m rubber insulator(abt 5pcs)
one + 1/2 can of adhesive glue
if any bros from 5th MU still holding to the rubber adhesive tape & cable ties, pls bring along.
if not, we nd to purchase more.
pls bring own pliers for taking out one of the nuts, scissors, cutter
knives and one tiny plastic bottle to contain the adhesive glue.
master andi bro, wld be nice if u cld join us too...ur wisdom is always needed
from another thread, bro waypoint suggest a MSCP with a kopitiam downstairs at Serangoon North Ave 4.
i'm ok with that unless there's a better location shelter from the rain.
1)SpicyRed
2)
Hi bro SpicyRed, from the stocks you have, its enough for one car mod only.
2 meters Amarex rubber Insulator = 2 cars mod, half can adhesive glue is enough for about 10 cars
and you need 1 box roll rubber adhesive tape. You can try buying another roll without the rubber
backing, thinner and high bonding strength for the final tightening of the rubber tape (as some bros complain peeling off bcos of the intense heat generate from the engine compartment) I find this tape quite useful, cost only $7.
I am not very sure I can attend your East group DIY, anyway I try to be there.
PS: I still prefer doing the DIY on the bright day.
andikong- Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
Again regarding the use of cable ties, I advise to constrain the use of too many cable ties.
I only tie both ends of the rubber insulator. Using much too many will create a balloon effect in between and causes air leak effect and partially sealed. The cable ties which bro Tower have in hand is the ideal size and I think is enough for 10 cars mod.
I only tie both ends of the rubber insulator. Using much too many will create a balloon effect in between and causes air leak effect and partially sealed. The cable ties which bro Tower have in hand is the ideal size and I think is enough for 10 cars mod.
andikong- Member
Re: 12Jul Air-con unfinish/redo/new DIY(prefer east area)
dandeana21 wrote:ooo!!! wat time r u guyz going to meet ah????
This time bring all your bear bears along, lets see your whole collections...haha... not difficult right.
andikong- Member
Page 1 of 4 • 1, 2, 3, 4
Similar topics
» Mini Kopi Session 17th Dec 2130hrs @ North/North-East Area
» Which tyre model you prefer???
» F.O.G.S. East Siders Fall In!
» Tyre Shop in the east?
» Sports - East Siders
» Which tyre model you prefer???
» F.O.G.S. East Siders Fall In!
» Tyre Shop in the east?
» Sports - East Siders
Permissions in this forum:
You cannot reply to topics in this forum
|
|
4th August 2011, 10:13 pm by Guest
» APP Leading Website Generator
4th August 2011, 11:47 am by Guest
» check-up
4th August 2011, 10:03 am by Guest
» Blu-ray to iPad Ripper lift Blu glimmer DVD movies quest of iPad
4th August 2011, 8:24 am by Guest
» ubiquitous
4th August 2011, 6:07 am by Guest
» South african indian dating. Nz internet dating.
3rd August 2011, 8:57 pm by Guest
» WHAT CREEPY IDEA ON YOUTUBE HASN'T ALREADY BEEN DONE YET?
3rd August 2011, 7:30 pm by Guest
» buy facebook fan f8
3rd August 2011, 3:15 pm by Guest
» division
3rd August 2011, 11:43 am by Guest